Center Console Panel Pocket Replacement

Center Console Panel Pocket Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the pocket.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the center console Center Console Removal/Installation.

2. Remove the center console panel Center Console Panel Removal/Installation.

3. Remove the screws, then remove the console pocket (A) from the console panel (B).






4. Remove the screws and release the tabs (A), then remove the upper lid (B).






5. Remove the arm (A) and the spring (B).






6. Remove the console pocket lid (A) from the console pocket (B).





7. Install the pocket in the reverse order of removal, and apply oil to entire rail area of the arm.