Second Row Seat Armrest Panel Replacement

Second Row Seat Armrest Panel Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program, 888-424-6857

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to tear the seams or damage the seat covers.

1. Remove the armrest Second Row Seat Armrest Replacement.

2. Remove the center head restraint.

3. Pull out the head restraint guides (A) while pinching the end of the guides, and remove them.






4. Remove the screws, gently pull out the rear armrest cover (A) to release the hooks (B) of the armrest panel (C), then remove the cover.






5. Pull back the ISO-FIX trim (A).






6. Remove the armrest panel (A).

1. Remove the screws.

2. Gently pull out the armrest panel to detach the clip and to release the hooks (B).





7. Install the armrest panel in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip and the hooks on the panel into place securely.