Third Row Seat-Back Recline Lever Replacement

Third Row Seat-Back Recline Lever Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program, 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to kink the seat-back recline cable.

1. Remove the left third row seat or right third row seat Third Row Seat Removal/Installation.

2. Remove the seat-back Third Row Seat Disassembly/Reassembly.

3. Pry out the lid (A), and remove the screws securing the third row seat-back recline lever (B).





4. Remove the back cover, then release the hooks from behind the seat-back, as needed.

5. Remove the outer latch cover.

6. Disconnect the seat-back recline cable.

7. Remove the clips, then remove the seat-back recline lever (A) with the recline cable (B).





8. Install the lever in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the recline cable is connected securely.
- Make sure the seat unlatches properly and latches securely.