Fuel Door Switch: Testing and Inspection

Fuel Fill Door Opener Switch Test/Replacement

NOTE: Before testing, check the B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Remove the driver's door panel Front Door Panel Removal/Installation.

2. Disconnect the 7P connector (A) from the fuel fill door opener switch (B).





3. Check for continuity between terminals No. 1 and No. 2.

- There should be continuity with the switch pressed.
- There should be no continuity with the switch released.

4. If the continuity is not as specified, replace the switch.