Passenger's Power Seat Adjustment Switch

Power Seat Adjustment Switch Test/Replacement

Front Passenger's Seat

NOTE: SRS components are located in this area. Review the SRS component locations Locations, precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the power seat adjustment switch knobs and recline cover from the front passenger's power seat Front Seat Disassembly/Reassembly, then remove the power seat switch.

2. Disconnect the 12P connector from the power seat adjustment switch (A).





3. Reinstall the adjustment switch knobs to the switch.

4. Check for continuity between the terminals in each switch position according to the table.





5. If the continuity is not as specified, replace the switch.