Cowl Moulding / Trim: Service and Repair

Cowl Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the cowl cover or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the windshield wiper arms Wiper Motor Replacement.

2. Using a trim tool, remove the clips (A) from the cowl cover (B).





3. Release the windshield washer tube (C) from the hooks (D).

4. If necessary, remove the hood rear seal (E) from all of the hooks (F).

5. Pull the cowl cover (A) forward to release the hooks (B, C) from the windshield (D) and body. From both hood hinge portions, release the hooks (E, F) of the hood hinge cover (G) from the front fender (H) and the roof molding (I).





6. Remove the cowl cover.

7. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.