Brake Pedal Assy: Service and Repair

Brake Pedal Replacement

1. Remove the driver's dashboard undercover Driver's Dashboard Undercover Removal/Installation.

2. Remove the TPMS control unit Service and Repair.

3. Disconnect the brake pedal position switch connector (A), and remove the harness clips.





4. Remove the lock pin (B) and joint pin (C).

5. Remove the harness and connector clips.

6. Remove the brake pedal bracket mounting bolt (D) and nuts (E).

7. Remove the brake pedal with bracket (F).

8. Remove the brake pedal position switch (G) by turning it counterclockwise.

9. Install in the reverse order of removal.

10. Do the brake pedal and brake pedal position switch adjustment Adjustments.