Line Pressure Switch Replacement

Line Pressure Switch Replacement

1. Do the battery removal procedure Removal and Replacement.

2. Remove the main under-hood fuse box from the battery base.

3. Remove the intake air duct and the air cleaner housing.

4. Remove the battery base and the battery base bracket.

5. Disconnect the line pressure switch connector, and remove the line pressure switch (A) and the sealing washer (B).





6. Install a new line pressure switch and a new sealing washer, and tighten the switch.

7. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

8. Install the battery base bracket and battery base.

9. Install the air cleaner housing and the intake air duct.

10. Install the main under-hood fuse box on the battery base.

11. Do the battery installation procedure Removal and Replacement.