SH-AWD Differential Clutch Torque Memorization

SH-AWD Differential Clutch Torque Memorization

Whenever the right or left clutch side case is replaced, the differential clutch torque memorization must be done.

1. With the ignition switch in LOCK (0), connect the HDS to the DLC (A) behind the driver's dashboard lower cover.






2. Turn the ignition switch to ON (II).

3. Make sure the HDS communicates with the vehicle and the SH-AWD control unit. If it doesn't, go to the DLC circuit troubleshooting Testing and Inspection.

4. From the mode menu, select SH-AWD, select MISCELLANEOUS TEST, select NEUTRAL MENU, then select DIFFERENTIAL TORQUE with the HDS, and follow the screen prompts.

NOTE: See the HDS help menu for specific instructions.