Traction Control Switch: Testing and Inspection

VSA Off Switch Test/Replacement

1. Turn the ignition switch to LOCK (0).

2. Remove the driver's dashboard undercover Driver's Dashboard Undercover Removal/Installation.

3. Push out the VSA OFF switch (A) from the back of the instrument panel.





4. Disconnect the VSA OFF switch 5P connector (except Canada models with ACC) (B) or VSA OFF switch 13P connector (Canada models with ACC).

5. Check for continuity between the VSA OFF switch 5P connector terminals No. 1 and No. 2 (except Canada models with ACC) or VSA OFF switch 13P connector terminals No. 11 and No. 12 (Canada models with ACC). There should be continuity when the button is released, and no continuity when the button is pressed.






6. Check for continuity between the VSA OFF switch 5P connector terminals No. 4 and No. 5 (except Canada models with ACC) or VSA OFF switch 13P connector terminals No. 1 and No. 5 (Canada models with ACC). There should be continuity at all times.






7. Install the reverse order of removal.