Adaptive Cruise Control (ACC) Distance Switch Test

Adaptive Cruise Control (ACC) Distance Switch Test

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service and Repair before doing repairs or service.

1. Remove the driver's airbag Driver's Airbag Replacement.

2. Disconnect the 20P connector (A) from the cable reel.






3. Check for continuity between the 20P connector terminals in each switch position according to the table.





4. If the continuity is not as specified, replace the distance switch Adaptive Cruise Control (ACC) Combination Switch/Distance Switch Removal/Installation.

5. Use a diode tester between the 20P connector terminals in each switch position according to the table.





6. If the diode test is not as specified, replace the distance switch Adaptive Cruise Control (ACC) Combination Switch/Distance Switch Removal/Installation.