Ride Height Sensor: Service and Repair

Suspension Stroke Sensor Replacement

NOTE:

- Removal and replacement of the right side suspension stroke sensor is the same procedure as for the left side suspension stroke sensor.
- After installing the rear suspension stroke sensor, do the memorizing rear suspension full rebound position Programming and Relearning.

1. Raise the vehicle, making sure it is securely supported.

2. Disconnect the 3P connector (A) from the suspension stroke sensor (B).

LEFT-FRONT





LEFT-REAR





3. Remove the bolt and nut, then remove the suspension stroke sensor.

4. Install the sensor in the reverse order of removal.

5. After installing, do the headlight initial position learning procedure Programming and Relearning.