Suspension Mode Switch: Service and Repair

Active Damper System Switch Test/Replacement

1. Turn the ignition switch to LOCK (0).

2. Remove the center console Center Console Removal/Installation.

3. Remove the center console box Center Console Box Replacement.

4. Push out the active damper system switch (A) from the back of the center console.





5. Disconnect the active damper system switch connector (B).

6. Check for continuity between the active damper system switch connector terminals in each switch position according to the table.





7. If the continuity is not as specified, replace the illumination bulb or the switch.

8. Install the reverse order of removal.