Audio Remote Switch Test

Audio Remote Switch Test

SRS components are located in this area. Review the SRS component location Locationsand the precautions and procedures Service and Repair in the SRS section before doing repairs or service.

1. Remove the steering wheel Steering Wheel Removal.

2. Remove the audio remote switch Service and Repair.





3. Measure the resistance between the No. 7 and No. 9 terminals in each switch position according to the table.





4. If the resistance is not as specified, replace the audio remote switch.

5. Use a diode tester between the terminals in each switch position according to the table.





6. If the diode test is not as specified, replace the audio remote switch Service and Repair.