Left Driver's Dashboard Panel Removal / Installation

Left Driver's Dashboard Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Remove the left dashboard side trim Dashboard Side Trim Removal / Installation.

2. Gently pull out the left driver's dashboard panel (A) to detach the clip and release the hook (B), then remove the panel.





3. Install the panel in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip and the hook into place securely.