Dashboard Center Panel Removal / Installation

Dashboard Center Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Remove these items:

- Right driver's dashboard panel Right Driver's Dashboard Panel Removal / Installation
- Passenger's dashboard trim panel Passenger's Dashboard Trim Panel Removal / Installation
- Center panel trim Dashboard Center Panel Trim Removal / Installation

2. Remove the center panel (A).

1. Remove the screws (B).

2. Gently pull out the panel to detach the clips (C, D), then remove the panel.

3. Disconnect the climate switch connectors (E), the hazard warning switch connector (F), and the audio switch panel connectors (G).





3. Install the panel in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure each connector is plugged in properly.