Engine Does Not Start With the Immobilizer Key

Immobilizer System Symptom Troubleshooting - Engine does not start with the immobilizer key

Engine does not start with the immobilizer key

NOTE: Before troubleshooting, check the items listed in General Check Before Troubleshooting.

1. Try to start the engine.

Does the engine start?

YES -

Intermittent failure, the vehicle is OK at this time. Check status log Immobilizer System Status Log and check the line as indicated in the table.

NO -

Go to step 2.

2. Turn the ignition switch to LOCK (0).

3. Turn the ignition switch to ON (II), and check the immobilizer indicator indication.

Does the indicator blink once, then stay off?

YES -

Go to step 4.

NO -

Go to the immobilizer indicator blinks troubleshooting Immobilizer Indicator Blinks After the Ignition Switch Is Turned to Lock (0).

4. Turn the ignition switch to START (III).

Does the starter motor run?

YES -

Go to step 5.

NO -

Go to Starting System Symptom Troubleshooting .

5. Try to start the engine with the immobilizer key.

Does the engine start?

YES -

Go to step 6.

NO -

Go to the PGM-FI System Symptom Troubleshooting .

6. Wait for a few minutes with the engine running.

Does the engine stop?

YES -

Go to the PGM-FI System Symptom Troubleshooting .

NO -

The system is OK at this time.