Passenger's Power Window Motor Test

Passenger's Power Window Motor Test

1. Remove the passenger's power window switch, and disconnect the connector (A).






2. Test the motor in each direction by connecting battery power and ground to the passenger's power window switch 14P connector according to the table.





3. If the motor does not run or fails to run smoothly, go to step 4. If the motor is OK, do each power window switch input test.

- Front passenger's Front Passenger's Power Window Switch Input Test
- Left rear Left Rear Power Window Switch Input Test
- Right rear Right Rear Power Window Switch Input Test

4. Disconnect the 6P or 2P connector from the passenger's power window motor.

5. Check for continuity between the passenger's power window switch 14P connector terminals No. 8 and No. 14 and passenger's power window motor 6P (or 2P) connector terminals No. 1 and No. 4 (or No. 2) respectively.

Front passenger's door










Rear door









6. If the wire harness is OK, replace the appropriate power window motor.

- Front passenger's power window motor Service and Repair
- Rear power window motor Service and Repair