Automatic Transmission

Switch Test
1. Test back-up light switch by shifting the shift lever in "R" and turning the ignition switch to ON.
2. If the back-up lights do not go on, check the No. 3 (1OA) fuse in the dash fuse box and the back-up light bulbs in the taillight assembly.
3. If the fuse and bulbs are OK, remove the front console, then disconnect the 10-P connector from the shift lever position console switch (back-up light switch).
4. Check for continuity between the terminals.
- If there is no continuity, replace the switch assembly.
- If there is continuity, yet the back-up lights still do not go on, it must be caused by an open in the YG or BL wire.