Ignition Lock: Service and Repair

1. Remove ignition switch as previously described.
2. On Legend models, remove key light case socket and bulb by rotating socket 45°, then remove screw and case from lock assembly, if equipped.
3. Insert ignition key and move switch to ``I'' position.
4. Depress pin and remove lock cylinder from body.
5. Turn ignition key to ``lock'' position and align lock cylinder with body.
6. Turn key almost to ``I'' position and insert lock cylinder until pin contacts body.
7. Turn key to ``I'' position, then depress pin and insert lock cylinder until pin clicks into place.
8. Install ignition switch.