Ignition Switch: Service and Repair

On Legend models equipped with air bag restraint system, use extreme care when working around steering column or center console area to avoid serious personal injury. All electrical harnesses for this system are covered with a yellow outer insulation, with related components located in the steering column, center console, dash panel and front fenders. It is recommended that only authorized personnel work on vehicles with this type of restraint system.

Fig. 13 Ignition switch replacement (Typical):

1. Disconnect battery ground cable.
2. Remove steering column lower panel and cover.
3. Disconnect electrical connector from switch.
4. Insert ignition key and move switch to ``0'' position.
5. Unfasten switch wires, then remove switch attaching bolts and the switch, Fig. 13.
6. Reverse procedure to install.