Pinout Values and Diagnostic Parameters

If the inspection for a particular failure code requires the PGM-FI test harness, remove the front passenger seat and connect the PGM-FI test harness and multimeter as shown. Then check the system according to the procedure described for the appropriate code (5) listed.




CAUTION:
^ Puncturing the insulation on a wire can cause poor or intermittent electrical connections.
^ For testing at connectors other than the PGM-FI test harness, bring the tester probe into contact with the terminal from the connector side of wire harness connectors in the engine compartment. For female connectors, just touch lightly with the tester probe and do not insert the probe.