Failure Mode H

Mode H: Starter signal abnormal.


CAUTION : Disconnect both the negative and positive battery cables. Connect the short connector to the airbag assembly - refer to "Indicator Light Troubleshooting", caution notice.


1. Reconnect the battery cables, then connect the SRS test harness B to the main harness 12-P connector. Check for battery voltage at the B5 terminal (with ignition switch ON).






SRS Test Harness B

- If there is no voltage, the SRS unit is faulty; replace and recheck the voltages according to the chart in the "Indicator Stays On Continuously" procedure.

- If there is battery voltage, there is a starter signal short.