Rearview Mirror - Reinstallation Procedure

BULLETIN NO.
92-039



YEAR
1992 - 93
1991 - 93
1991 - 93



MODEL
VIGOR
LEGEND
NSX



VIN APPLICATION
ALL



December 8, 1992



Rearview Mirror Reinstallation

PROBLEM

The rearview mirror may be accidentally knocked off the windshield lug and some of the internal parts can be broken or lost.


CORRECTIVE ACTION

Replace any missing or damaged parts (see PARTS INFORMATION), and reinstall the rearview mirror.

1. Remove the lock bolt from the mirror stay as described in the appropriate service manual.





2. Inspect the hook plate. If the hook plate is distorted, bend it to its original 90~ position.



3. Inspect the lock bolt, the toothed washer, and the hold spring. Replace any parts that are missing, broken, or distorted (see PARTS INFORMATION).






4. Loosely install the hook plate, hold spring and the toothed washer to the mirror stay using the lock bolt. Make sure the hook plate is over the top of the toothed washer. Thread in the lock bolt until the toothed washer is approximately 5 mm from the mirror stay.



5. Install the mirror on the windshield lug, and torque the lock bolt to 2.0-3.0 N-m (20-30 kg-m, 14-22 lb.ft.).

PARTS INFORMATION

Vigor and NSX

Description P/N

Lock bolt 76410-SL4-003

Toothed washer 76409-SL0-003

Hold spring 76409-SP0-A01

Legend

Description P/N

Lock bolt 76410-SL4-003

Toothed washer 76410-SP0-003

Hold spring 76409-SP0-A01



WARRANTY CLAIM INFORMATION

In warranty:
The normal warranty applies.

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request consideration, and get the DSM's decision, before starting work.

Operation number:
828155

Flat rate time:
0.2 hour

Failed P/N:
P/N 76400-SPO-A01ZA

Defect code:
018

Contention code:
B99