Lateral Accelerometer: Testing and Inspection

CAUTION: Be careful not to drop or bump the Lg sensor, and don't remove or install it with an impact wrench; the Lg sensor may be damaged.

1. Remove the rear center trim panel.




2. Remove the Lg sensor from the bracket.
3. Turn the ignition switch ON (II).




4. Measure the voltage between terminal No. 1 and No. 2 with the connector connected.
- There should be approx. 2.5 V when the Lg sensor is vertical.
- There should be approx. 1.5 V when the Lg sensor is horizontal with the connector side facing up.
- There should be approx. 3.5 V when the Lg sensor is horizontal with the connector side facing down.