Dome Lamp: Service and Repair

CEILING LIGHT / TEST AND REPLACEMENT

With Moonroof
1. Turn the light switch OFF.
2. Pry off the lens.

With Moonroof:

3. Remove the two mounting nuts, then pull out the housing.
4. Disconnect the 3-P connector from the housing.

With Moonroof:

5. Check for continuity between the terminals in each switch position according to the table.

Without Moonroof
1. Turn the light switch OFF.
2. Pry off the lens.

Without Moonroof:

3. Remove the screw, then pull out the housing.
4. Disconnect the 3-P connector from the housing.

Without Moonroof:

5. Check for continuity between the terminals in each switch position according to the table.