Taillights Replacement - Sedan

TAILLIGHT / REPLACEMENT (SEDAN)

Taillight:
1. Open the trunk lid, then remove the rear panel lining and side lining.
2. Disconnect the 4-P connector from the taillight.







3. Remove the four mounting nuts, then pull out the taillight.

Inner Taillight:
1. Open the trunk lid.
2. Disconnect the 4-P connector from the inner taillight.







3. Remove the four mounting nuts, then pull out the inner taillight.

NOTE:
- Inspect the gasket. Replace it if it is distorted or stays compressed.
- After installation, run water over the lights to make sure they don't leak.