With Manufacturer's Scan Tool

To use OBD-II scan tool, proceed as follows:




- Connect scan tool to 16-pin data link connector data link connector located behind righthand side of front console.
- Turn ignition switch to On position.
- Follow scan tool manufacturer's operating instructions to access data trouble codes.

NOTE: Check the DTC and note it. Also check and note the freeze frame data. Refer to the Diagnostic Trouble Code Chart and begin troubleshooting. See the OBD-II scan tool user's manuals for specific operating instructions. The scan tool can read the Diagnostic Trouble Codes (DTC), freeze frame data, current data, and other Engine Control Module (ECM) data.
- Freeze frame data indicates the engine conditions when the first malfunction, misfire or fuel trim malfunction was detected. It can be useful information when troubleshooting.

NOTE: See the Honda PGM Tester user's manuals for specific operating instructions. tester can read the Diagnostic Trouble Codes (DTC), freeze frame data, current data, and other Engine Control Module (ECM) data.
- Freeze frame data indicates the engine conditions when the first malfunction, misfire or fuel trim malfunction was detected. It can be useful information when troubleshooting.