Clutch Master Cylinder - Fluid Leakage

02-012

May 6, 2002

Applies To: 1994-01 Integra With M/T - ALL

Fluid Seepage From the Clutch Master Cylinder

SYMPTOM

Fluid from the clutch master cylinder leaks inside the vehicle.

PROBABLE CAUSE

The clutch master cylinder seals are worn.

CORRECTIVE ACTION

Install a new clutch master cylinder and a new clutch line A.

PARTS INFORMATION

Clutch Master Cylinder:
P/N 06469-ST7-305

Clutch Line A:
1994-97 (except 1997 Type R)
P/N 06469-ST7-306

1998-99 (and 1997 Type R)
P/N 06469-ST7-307

2000-01 (all)
P/N 06469-ST7-308

REQUIRED MATERIALS

DOT 3 Brake Fluid: P/N 08798-9008





WARRANTY CLAIM INFORMATION

REPAIR PROCEDURE

1. Remove the clutch line from the clutch master cylinder and from the connection joint mounted on the engine compartment bulkhead.

2. Remove the clutch master cylinder from the vehicle. Refer to page 12-5 of the 1998 Integra Service Manual.

3. Install the new clutch master cylinder. Torque the mounting nuts to 13 Nm (9 lb-ft).

4. Install the new clutch line A. Torque the flare nut connections to 15 Nm (11 lb-ft).

5. Bleed the clutch hydraulic system.

6. Test clutch system operation, and check for leaks.