Flywheel: Specifications

DIMENSIONS
Clearance Between The Shift Piece And The Shift Arm Holder:
Standard 0.1 - 0.3 mm (0.004 - 0.012 inch)
Service Limit 0.6 mm (0.02 inch)
Width Of The Groove In The Shift Piece:
Standard 8.1 - 8.2 mm (0.319 - 0.323 inch)
Clearance Between The Select Arm And The Interlock:
Standard 0.05 - 0.25 mm (0.002 - 0.010 inch)
Service Limit 0.5 mm (0.02 inch)
Width Of The Interlock:
Standard 9.9 - 10.0 mm (0.390 - 0.394 inch)
Clearance Between The Select Arm And The 10 mm Shim:
Standard 0.01- 0.2 mm (0.0004 - 0.008 inch)
Clearance Between The Shift Arm Holder And The Change Piece:
Standard 0.05 - 0.35 mm (0.002 - 0.014 inch)
Service Limit 0.8 mm (0.03 inch)
Groove Of The Change Piece:
Standard 12.05 - 12.15 mm (0.4744 - 0.4783 inch)
Clearance Between The Select Arm And The Change Piece:
Standard 0.05 - 0.35 mm (0.002 - 0.014 inch)
Service Limit 0.5 mm (0.02 inch)
Width Of The Change Piece:
Standard 12.05 - 12.15 mm (0.4744 - 0.4783 inch)

TIGHTENING SPECIFICATIONS
Bearing Retainer Plate 15 Nm (11 ft. lbs.)
Change Piece 30 Nm (22 ft. lbs.)
Oil Chamber Plate 12 Nm (108 inch lbs.)
Rear Mounting Bolts 64 Nm (47 ft. lbs.)
Reverse Change Holder 15 Nm (11 ft. lbs.)
Shift Arm Holder [1]:
Bolt A 12 Nm (108 inch lbs.)
Bolt B 15 Nm (11 ft. lbs.)
Transmission Hanger:
A 27 Nm (20 ft. lbs.)
B 24 Nm (17 ft. lbs.)

[1] Refer to exploded view for further information.

Flywheel (M/T) Torque: