Displaying & Reading Trouble Codes

1. Stop the engine.
2. Turn the ignition switch ON (II), and confirm that the TCS indicator light comes on.
3. Turn the ignition switch off.




4. Connect the SCS service connector to the service check connector located under the glove box.
5. Turn the ignition switch ON (II), but do not start the engine.




6. Record the blinking frequency of the TCS indicator light. The blinking frequency indicates the DTC. Long blinks indicate the main code: short blinks indicate the sub-code.
7. Refer to the Trouble Code Descriptions for repair information. DTC List - Traction Control Systems (TCS)