Electrical - Wiring Terminal Replacement Instructions: Overview
00-039December 18, 2000
Applies To:
ALL
Terminal Replacement Instructions
(Replaces 95-007, dated May 2, 1995)
** Indicates updated information **
Black Bars in illustrations indicate updated information
** These terminal replacement instructions apply to these kits and tools:
^ Terminal Pin Kit A: T/N 07JAZ-003000B
^ Terminal Pin Kit B: T/N 07QAZ-003020B
^ Terminal Inspection Feeler Tool Set:
T/N 07XAJ-001000A **
This bulletin covers these topics:
^ How to Replace Connector Terminals
^ How to Install New Terminals
^ How to Install Pigtail Terminals
^ Pigtail Terminal Selection Chart
^ ** Checking for Poor Fit of Terminals **
WARRANTY CLAIM INFORMATION
None; this bulletin is for information only.
** PARTS INFORMATION
Terminal Inspection Feeler Tool Set:
T/N 07XAJ-001000A
Terminal Pin Kit A: T/N 07JAZ-003000B, which contains Pin Tool Set T/N 07JAZ-002000A, Crimper T/N 07JAZ-001020A, and various terminals.
Terminal Pin Kit B: T/N 07QAZ-003020B, which contains Crimper Tool Set T/N 07NGZ-001010A (used on splice connectors only), Heat Gun T/N 07NGZ-001020A, various terminals, and splice connectors.
The following kit has been shipped to dealerships. This kit is to be added to Terminal Pin Kit B, T/N 070AZ-00302DB:
Terminal Pin Update Kit, T/N 07XAZ-002000A which includes 25 each of the terminals shown. **
Replacement terminals, wire seals, and splice connectors are listed on the inside lid of each terminal pin kit.
Additional information on replacement connectors, terminals, and pigtails is listed in the Acura Electrical Connector Catalog shown (P/N 13CNNB-3).
DISCLAIMER