Crankshaft, Engine

JOURNAL DIAMETER:
Main No. 1.2.4 and 5 54.976 - 55.000 mm (2.1644 - 2.1654 inch)
Main No. 3 54.970 - 54.994 mm (2.1642 - 2.1651 inch)
Connecting Rods 44.976 - 45.000 mm (1.7707 - 1.7717 inch)

TAPER:
Standard Maximum (New) 0.005 mm (0.0002 inch)
Service Limit 0.010 mm (0.0004 inch)

OUT-OF-ROUND:
Standard Maximum (New) 0.005 mm (0.0002 inch)
Service Limit 0.010 mm (0.0004 inch)

END PLAY:
Standard (New) 0.10 - 0.35 mm (0.004 - 0.014 inch)
Service Limit 0.45 mm (0.018 inch)

RUNOUT:
Standard Maximum (New) 0.03 mm (0.001 inch)
Service Limit 0.05 mm (0.002 inch)