Installation

CAUTION: Any bolts or nuts connected to rubber mounts or bushings should be with the vehicle on the ground.

NOTE:
- Make sure the self-locking bolts on the compensator arms are installed in the same direction.
- "LV" is stamped on the left lower arm and "RV" on the right lower arm.
- "(Arrow Pointing upward) UP LSR" is stamped on the left upper arm and "(Arrow Pointing upward) UP RSR" on the right upper arm.
- The right and left compensator arm are symmetrical. Install so the "(Arrow Pointing upward) UP" mark stamped side faces forward.
- After installing the suspension arm, check the rear wheel alignment and adjust if necessary.