Countershaft, M/T

DIMENSIONS
Clearance Between 2nd And 3rd Gear:
Standard 0.04 - 0.10 mm (0.002 - 0.004 inch)

Clearance Between 1st And Reverse Gear:
Standard 0.04 - 0.10 mm (0.002 - 0.004 inch)

Bearing Surface:[1]
Standard:
A 43.974 - 43.990 mm (1.7313 - 1.7319 inch)
B 33.984 - 34.000 mm (1.3380 - 1.3386 inch)
Service Limit:
A 43.920 mm (1.7291 inch)
B 33.930 mm (1.3358 inch)

TIGHTENING SPECIFICATIONS
Bearing Retaining Plate 12 Nm (108 inch lbs.)
Tighten Locknut In Three Steps:
1st Step 113 Nm (83 ft. lbs.)
2nd Step Back Off To 0
3rd Step 113 Nm (83 ft. lbs.)

[1] A (Needle bearing surface) B (Ball bearing surface)