Removal and Installation

Removal

SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.

CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

NOTE: Take care not to scratch the seat covers and body.

1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
2. Disconnect the negative battery cable, and wait at least 3 minutes before beginning work.




3. Remove the seat track end covers, then remove the bolts.




4. Lift the front seat, then disconnect the connectors.
5. Remove the headrest.
6. Carefully remove the front seat through the door opening.
7. Installation is the reverse of the removal procedure.

NOTE:
- Make sure the connectors are connected properly.
- Enter the anti-theft code for the radio, then enter the customer's radio station presets.