Supplemental Restraint System (SRS)

The seat with a airbag is marked with a side airbag on the surface of the seat-back. Because the component parts (seat-back cover, cushion, etc.) of seats with and without airbags are different, make sure you install only the correct replacement parts.

When cleaning, do not saturate the seat with liquid, and do not spray steam on the seat.

Do not repair torn or frayed seat-back covers. Replace the seat-back cover.






After a collision in which the side airbag was deployed, replace the seat-back cover and the side airbag with new parts. If the seat-back cushion is split, it must be replaced. If the seat-back frame is definitely deformed, it must be replaced. If you are not sure if the seat-back frame is deformed, check the side airbag upper mount base as shown. If the distance "a" is more than 24 mm, replace the seatback frame.