1ST Gear One-Way Clutch Disassembly/Inspection/Reassembly
Disassembly/Inspection/Reassembly1. Remove the set plate from the countershaft 1st gear.
2. Remove the one-way clutch by prying it up with the end of a screwdriver.
3. Inspect the parts as follows:
4. Assemble the one-way clutch, thrust needle bearing and set plate on the countershaft 1st gear.
5. Hold countershaft 1st gear, and turn the countershaft 2nd gear assembly in the direction shown to be sure it turns freely. Also make sure the countershaft 2nd gear assembly does not turn in the opposite direction.