Hatchback

Glass Bracket/Slider, Lifter, Guide Rails and Cable Assembly Replacement

1. Remove the frame from the car.
2. Remove the motor.
3. Remove the drain channel.






NOTE: Take care not to damage, twist or lift the seal.




4. Remove the front drain channel on each side.




5. Remove the front rail holder on each side.
6. Remove the anchor spring on each side.




7. Remove the nuts and screws, then lift and remove both guide rails and cable assembly from the frame. Remove the sunshade and both sunshade rails.
8. Slide the guide rail forward, then remove it.






NOTE: Take care not to bend the inner cable.




9. Separate the glass bracket, lifter, slide stopper link and slider.




10. Slide the anchor rod forward, then remove it from the guide rail.
11. Installation is the reverse of the removal procedure.

NOTE:
- Damaged parts should be replaced.
- Apply grease to the sliding portion.