Fuel Door Release Cable: Service and Repair

Opener Cables

Removal

NOTE:
- When removing the clips, use a clip remover.
- Take care not to bend the opener cables.

Hood opener cable:






NOTE: Remove the inner fender and kick panel from the left side of the vehicle.

Fuel fill door opener cable:






NOTE: Remove the following parts from the left side of the vehicle, then pull the carpet and rear carpet back, as necessary.

- Front and rear side trim
- Front and rear door trim
- Front seat belt lower anchor
- Center pillar trim
- Rear seat cushion and rear seat-back
- Trunk front trim
- Spare tire lid
- Rear trim panel and trunk side trim

Installation is the reverse of the removal procedure.

NOTE:
- Make sure each opener cable is routed and connected properly.
- Make sure the hood and fuel fill door open properly.