Service Specifications

Transmission
Mainshaft reverse gear distance collar length
Standard (New) 25.95 - 26.05 (1.022 - 1.026)
Limit Wear or damage
Thrust washer, 29 mm thickness
Standard (New) 3.95 - 4.00 (0.156 - 0.157)
Limit Wear or damage
Mainshaft 2nd gear collar length
A
Standard (New) 35.00 - 35.05 (1.378 - 1.380)
Limit Wear or damage
B
Standard (New) 31.06 - 31.09 (1.223 - 1.224)
Limit Wear or damage
Mainshaft 1st gear thrust washer thickness
Standard (New) 3.45 - 3.55 (0.136 - 0.140)
Limit Wear or damage
Mainshaft 1st gear distance collar length
Standard (New) 34.05 - 34.08 (1.341 - 1.342)
Limit Wear or damage
Mainshaft 1st gear collar length
A
Standard (New) 33.90 - 33.97 (1.335 - 1.337)
Limit Wear or damage
B
Standard (New) 30.05 - 30.10 (1.183 - 1.185)
Limit Wear or damage
Mainshaft/Countershaft 7 mm bushing I.D.
Standard (New) 7.018 - 7.030 (0.276 - 0.277)
Limit 7.045 (0.277)
Mainshaft/Countershaft 11.5 mm bushing I.D.
Standard (New) 11.500 - 11.518 (0.4528 - 0.4535)
Limit 11.53 (0.454)
Mainshaft sealing ring 37 mm thickness
Standard (New) 1.87 - 1.97 (0.07 - 0.08)
Limit 1.82 (0.072)
Mainshaft sealing ring groove width
Standard (New) 2.025 - 2.060 (0.080 - 0.081)
Limit 2.08 (0.082)