Torque Converter Clutch Solenoid: Service and Repair

Replacement

NOTE: Torque converter clutch (lock-up control) solenoid valves A and B must be replaced as an assembly.

1. Remove the mounting bolts and torque converter clutch solenoid valves A and B.
2. Clean the mounting surface and fluid passages of the torque converter clutch solenoid valves A and B, and install a new torque converter clutch solenoid valves A and B with a new filter/gasket.

NOTE: Install the filter/gasket in the direction shown.

3. Check connector for rust, dirt or oil, then reconnect the connector securely.