Oil Seal Replacement

TOOLS REQUIRED
* 07LAD-PW50601 Attachment, 40x50 mm, I.D.
* 07749-0010000 Driver
* 07LAD-PW50500 Pinion Cover Driver Attachment
* Or Equivalent

REMOVAL





1. Remove the oil seal from the transmission housing.





2. Remove the oil seal from the torque converter housing.

INSTALLATION





1. Install the oil seal in the transmission housing using the special tool as shown.
2. Drive the oil seal into the torque converter housing using the special tools as shown.





3. Install the snap ring in the torque converter housing.