Keyless Entry: Description and Operation

This system is activated automatically 15 seconds after everything has been closed and locked. The security alarm system indicator light located on the driver's side door panel will flash after the doors are properly locked.

If any of the following conditions occur, the siren will sound, the headlights will flash, and the side marker lights, parking lights and taillights will flash for about two minutes or until the system is disarmed by unlocking either door from the outside with the key or transmitter.

1. Door is opened forcibly.
2. Trunk lid is opened without using the transmitter.
3. Hood is opened.
4. Engine starter circuit and battery circuit are bypassed by breaking the ignition switch.
5. Panic button on the transmitter is pushed.
6. A door is unlocked without using the key or transmitter.

Keyless Entry/Security Alarm System (Part 1 Of 2):

Keyless Entry/Security Alarm System (Part 2 Of 2):

Flowchart of the security alarm system operation: