Hatchback

Rear Edge Closing Adjustment

Open the glass about a foot, then close it to check where rear edge begins to rise. If it rises too soon and seats too tightly against the roof panel, or too late and does not seat tightly enough, adjust it.

1. Remove the headliner.
2. Remove the glass.
3. Remove the motor.




4. Align the tilt-up position of the lifter on each side.
5. Check that the alignment left and right, then install the motor.
6. Install the glass, then check for water leaks.

NOTE: Do not use high-pressure water.

7. Install the headliner.