Blower Unit Removal and Installation

1. Remove the spare tire.

Blower Unit-Replacement:

2. Remove the spare tire holder.

Blower Unit-Replacement:

3. Disconnect the cables from the battery, loosen the hold-down bracket nuts, and remove the hold- down bracket. Then, remove the battery.

Blower Unit-Replacement:

4. Remove the under-hood relay box A and the water drain duct. Disconnect the connectors from the blower motor, power transistor and recirculation control motor.

Blower Unit-Replacement:

5. Remove the mounting bolts, then remove the blower unit.
6. Install the blower unit in the reverse order of removal, then make sure it runs and doesn't leak any air.