4. Torque Converter Housing Disassemble & Service
Mainshaft Bearing and Oil Seal ReplacementSpecial Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A Driver 07749-0010000
- Attachment, 62 x 68 mm 07746-0010500
- Attachment, 72 x 75 mm 07746-0010600
1. Remove the mainshaft bearing and oil seal with the special tool and a commercially available 3/8"-16 slide hammer (A).
2. Install the new mainshaft bearing until it bottoms in the housing with the special tools.
3. Install the new oil seal flush with the housing with the special tools.
Countershaft Bearing Replacement
Special Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
- Driver 07749-0010000
- Attachment, 62 x 68 mm 07746-0010500
1. Remove the countershaft bearing (A) with the special tool and a commercially available 3/8"-16 slide hammer (B).
2. Install the ATF guide plate (A).
3. Install the new bearing (B) into the housing (C) with the special tools.
Secondary Shaft Bearing Replacement
Special Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
- Driver 07749-0010000
- Driver Attachment 07947-6340500
1. Remove the secondary shaft bearing (A) with the special tool and a commercially available 3/8"-16 slide hammer (B).
2. Install the ATF guide plate (A).
3. Install the new bearing (B) into the housing (C) with the special tools.