Hood: Service and Repair
HoodReplacement
1. Disconnect the windshield washer tube (A).
2. With a flat-tip screwdriver, pry the clips (B) out of the support struts (C) on each hood side, then release both support struts from the pivot bolts (D) with the help of an assistant. Do not remove the clips from the support struts. If necessary, release the support strut from the pivot bolt on the body, then remove the support strut.
3. With the help of an assistant, remove the bolts, then remove the hood (E). Take care not to damage the hood and body.
4. Install the hood in the reverse order of removal, and note these items:
- Before reattaching the support struts, adjust the hood alignment.
- Make sure the hood opens properly and locks securely.
- Make sure the windshield washer tubes are connected properly.
- When reattaching the support struts, set the clips (A) to the original position, then attach the support struts (B) on the pivot bolts (C) by pushing the support strut.