Door Lock Actuator
Keyless Entry/Security Alarm SystemDoor Lock Actuator Test
Driver's door:
1. Remove the driver's door panel.
2. Disconnect the 2P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator does not work as specified, replace it.
Passenger's door:
1. Remove the passenger's door panel.
2. Disconnect the 2P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator does not work as specified, replace it.