Displaying & Reading Trouble Codes

General Troubleshooting Information

The self-diagnostic function of the driving position memory system detects system problems. This information can be retrieved by displaying diagnostic trouble code.

Displaying the Diagnostic Trouble Code (DTC)

1. Turn the ignition switch OFF, and move the seat to a non-memorized position.




2. Press the MEMO button (A) and both position buttons (B) at the same time, and hold them.
3. Turn the ignition switch ON (II), and wait at least 1 second, then release the three buttons.
4. After 1 second, the position button indicators (C) will blink to show the DTC.

DTC Indications No System Problem Pattern:




If there is no DTC stored, the indicators blink only once (3 seconds).

System Problem Pattern:




If a system problem has occurred, the DTC is stored, the indicators flash the DTC. The first digit is indicated by the number of long (1 second) blinks, and the second digit is indicated by the number of short (0.26 second) blinks. There is a 3 second break between each DTC when there are multiple DTCs.

Canceling the DTC Indication

- Turn the ignition switch OFF or
- Press the MEMO button, or the position button 1, or the position button 2, or
- Press one of the driving position adjustment switches.